United States Army Engineer Center and School
Fort Leonard Wood, Missouri 65473
7 Credit Hours
Edition Date: May 1998
This subcourse will enable you to direct the work of minefield siting, marking, laying, and recording parties and to conduct minefield reconnaissance and clearance operations. You will also learn how to install, record, and remove a hasty protective row minefield. Lesson 1 discusses minefield parties and row minefield emplacement. Lesson 2 discusses hasty protective row minefields. Lesson 3 discusses minefield reconnaissance. Lesson 4 discusses the procedures used to plan and conduct mine-clearance operations. Work must be accomplished in a manner consistent with environmental laws and regulations.
There are no prerequisites for this subcourse.
This subcourse reflects the doctrine that was current at the time when this subcourse was prepared. In your work, always refer to the latest official publications.
Unless otherwise stated, the masculine gender of singular pronouns is used to refer to both men and women.
TERMINAL LEARNING OBJECTIVE:
|ACTION:||You will learn to describe the procedures used to direct the work of siting, marking, laying, and recording parties; describe the procedures used to direct the installation/removal of a hasty protective row minefield; and determine the procedures required to conduct minefield reconnaissance and clearance operations.|
|CONDITION:||You will be given the material in this subcourse.|
|STANDARD:||To demonstrate competency of this task, you must achieve a minimum of 70 percent on the subcourse examination.|
TABLE OF CONTENTS