| 2015 | 2018 |
Machine type | armored, floating, gliding
|
Combat weight, weight | 30,700 kg | up to 35,000 kg
|
crew | three | 3
|
passengers | 10 paratroopers | ten
|
length | 9 m |
|
width | 3.4 m |
|
height | 2.94 m |
|
Ground clearance | 450 mm.
|
amphibious | water jet, a special transformable body to reduce hydrodynamic resistance.
|
engine | GTD-1250 gas turbine engine | GTD
|
power | 1,250 hp | up to 2500
|
Speed on highway km / h/ | | not less than 75
|
maximum speed over land | at least 55 km/h |
|
| driving on water with a
|
| sea wave up to 2 balls and a
|
wave height | 75 cm
|
continuous movement speed on water | at least 37 km/h | not less than 37
|
Power reserve land / water, km | | 300/100
|
main armament | 100-mm gun, 2A70 launcher, high-explosive fragmentation shells and guided ammunition
|
REMOTE CONTROLLED 57mm. MODULE "DAGGER"
| Rate of fire, not less, shots / min. | 80
| The initial velocity of the projectile, m / s | 1000 ... 1500
| Penetration at a distance of 1500 m, mm | 100 ... 120 at an angle of 60 °
| HV / GN targeting angles, degrees: | -5 ... + 60/360
| Ammunition ready for automatic shooting, pcs. | 80
| Additional weapons: | Twin 7.62 mm PKTM
| PKTM ammunition, rds | 1000
| PKTM rate of fire, rds / min. | 700 ... 800
| Weight of combat module, kg | 3850
|
|
secondary armament | 30-mm 2A72 gun is paired with it |
|
secondary armament | 7.62-mm machine gun |
|
Body Material | |
armored aluminum alloy with a plating (oxidized) layer;
a layer of corrosion-resistant (stainless) steel is applied to the elements of the hull and undercarriage with the possibility of restoring damaged areas in military repair and restoration bodies.
Electrical equipment and rubber products are made in the marine version.
Service life not less than 10 years with restoration at major repairs.
Applied materials, technologies and components ensure the operation of the machine from - 60 to +50° C.
|