• Military Menu                       

• Introduction
• Systems
• Facilities
• Agencies
• Industry
• Operations
• Countries
• Hot Documents
• News
• Reports
• Policy
• Budget
• Congress
• Links

• WMD
• Intelligence
• Homeland Security
• Space

JSC Zavod "Plastmass"

JSC Zavod "Plastmass" is one of the leading enterprises in the industry for the production of artillery ammunition of 76-152 mm caliber. The company specializes in the production of ammunition for naval combat guns, tank guns, field artillery guns and 76-152 mm artillery mounts.

JSC "Plant" Plastmass "today is one of the leading enterprises in the industry for the production of artillery ammunition of 76-152 mm caliber, warheads of missiles, including high-explosive fragmentation, armor-piercing, concrete-piercing, cumulative, anti-aircraft shells and mines, unguided aircraft missiles of type C -8 and mixed explosives.

Shells of the smallest caliber - 76 mm - are supplied by the plant for the needs of the Russian Navy. They also make much more powerful long-range shells - 130 mm caliber. A separate area is high-explosive fragmentation mines for the Tray portable mortar. Such a mine can be used both for close combat and for the destruction of enemy manpower and unarmored vehicles at a distance of up to three kilometers. In this case, the affected area reaches more than 70 square meters. Modern BMP-3s use 100-millimeter shells in combat operations. This weapon is capable of destroying the enemy in trenches and trenches at a distance of up to four kilometers.

Self-propelled guns of the Nona type use powerful 120-mm projectiles equipped with a modern thermobaric mixture. In addition to the explosion itself, the projectile covers the enemy with a deadly temperature and pressure, from which even caves and mountain gorges cannot save.

For tanks, Plastmass Plant JSC makes shells with a caliber of 125 mm. Moreover, in three modifications - high-explosive fragmentation, armor-piercing and cumulative. These munitions are designed to destroy enemy artillery firing positions in almost any weather conditions: rocket launchers, fortifications and engineering structures, enemy manpower - at a distance of up to 12 kilometers.

The plant also offers a wide range of 152-mm shells - from lighting and high-explosive fragmentation to long-range, capable of hitting a target 40 kilometers away! Shells are used in modern howitzers and are used to destroy all kinds of batteries, air defense systems, tactical missile installations, tank units, fortifications.

As for aviation unguided rockets, today the NAR S-8 rocket in various modifications is in greatest demand. This weapon is used on almost all Russian aircraft and helicopters - MiG, Su, Yak, helicopters of the Ka and Mi series. Rockets can penetrate concrete walls up to 80 cm thick, destroy the enemy among stones, in caves and forests. The weapon has a double effect. In addition to the cumulative effect of missiles over a large area, they also destroy enemy manpower. Various modifications of the S-8 rocket are the most export item of the plant. Today, they are equipped with front-line aviation in more than 30 countries of the world.

Plastmass Plant JSC is one of the leading enterprises for the production of industrial explosives, including the use of products obtained after the disposal of military products. They are equipped with unique safe, resource-saving and environmentally friendly technologies, which allows the release of valuable secondary raw materials, products and materials. In addition, the plant is the only manufacturer of classic industrial explosives in the Southern Urals , used in the mining industry and other sectors of the economy.

Plastmass Group [on the other hand] is the leading manufacturer of engineering plastics in Russia. Plastmass Group is a leading manufacturer of engineering plastics and high-performance plastics in the Russian market, providing cross-industry plastics solutions that outperform many common plastic products. At a young age, the company recognized the enormous need for new materials in the Russian market. Since then, the company's own production has been continuously expanded. The factory premises with production, warehouse and offices now cover an area of ??20,000 square meters. The company continues to grow from year to year to meet the global high demand. It sells plastics at 26 locations around the world and help industrial companies to improve their products and services. The Plastmass Group is constantly developing its standard materials and modified compounds and researching new plastic materials for more specific areas of application.

The Plastmass Group manufactures plastic products from standard plastics, high-performance plastics and engineering plastics under high quality standards (ISO 9001: 2015). For the production of our compounds, plastic semi-finished products and plastic finished parts, we only use high-quality and new raw materials from well-known suppliers. The materials listed below are available from us in the form of rods, plates and tubes. For this we use processes such as extrusion, pressing, calendering and casting, depending on the semi-finished plastic product.

Standard plastics, engineering plastics and high-performance plastics are used in a wide variety of industries for technical applications. We offer our materials as semi-finished products or as precisely processed finished parts. Companies around the world particularly value the durability and wear resistance of semi-finished plastic products, which are essential for the production of reliable plastic parts.