The Largest Security-Cleared Career Network for Defense and Intelligence Jobs - JOIN NOW

Military

M2/M3

Audio Visual Cue (A/V Cue)
 Table of Contents
NTC Boresighting & Zeroing
1. Install one 12 volt Lithium battery.
  1. Place battery into battery pouch.
  2. Connect pigtail adapter into the battery.

Display shall read

ENCODER OK
DECODER OK

Followed by two alternating flashing messages which should read

VEHICLE POWER
REQUIRED 		KILL BY SYSTEM
POWER ON

2. Vehicles will turn on their Master power switches.

The system will automatically run a BIT test. Display will read

STANDBY NOW
RUNNING BIT TEST

Note: If the VDD displays following messages:

ALERT REPLACE
MILES-2 BATTERY

Proceed with the next step.

3. Turn OFF the Master Power Switches.

4. Disconnect the Lithium battery and turn into OC for a fresh battery.

Follow steps one and two above with new battery.

THE VDD -- WHAT IT TELLS YOU

img58a.gif - 48.33 K

THE RDA -- WHAT IT TELLS YOU

img58b.gif - 33.91 K

LOADING AP ROUNDS

img59.gif - 62.03 K

LOADING HE ROUNDS

img60.gif - 31.49 K

TOW MILES MESSAGE COMPONENTS

img61.gif - 28.51 K

EACH MISSILE MESSAGE IS 8 MISSILE WORDS.
EACH CONSOLE OR ECU DECODES A HIT AFTER 22 MISSILE MESSAGES ARE DECODED.

RDA OPERATION
MISSILE/COAX

img62.gif - 52.04 K

Audio Visual Cue (A/V Cue)
 Table of Contents
NTC Boresighting & Zeroing



NEWSLETTER
Join the GlobalSecurity.org mailing list


One Billion Americans: The Case for Thinking Bigger - by Matthew Yglesias