Instructions |
The following items will test your understanding of the material covered in this lesson. There is only one correct answer for each item. When you have completed the exercise, check your answers with the answer key that follows. If you answer any item incorrectly, review that part of the lesson which contains the portion involved. |
|
1. |
You have been assigned to a new installation. Where can you get specific environmental laws and regulations for this location?
|
|
2. |
Refer to the sample risk-management work sheet in Figure PE 1-1. To identify hazards, which of the following questions would you answer?
|
|
3. |
Refer to the sample risk-management work sheet in Figure PE 1-1. Block F identifies one hazard as "Maneuver damage from off-road movement." Which of the following areas could be affected by this hazard?
|
|
4. |
Refer to the sample risk-management work sheet in Figure PE 1-1. Completion of Block G requires two procedures. First, determine the probability and ________ of the hazard.
|
|

Figure PE 1-1. Sample risk-management work sheet
5. |
Refer to the sample risk-management work sheet in Figure PE 1-1 and the risk-assessment matrix in Figure 1-6. Assume that you must assess the hazard for an action that is seldom done and has critical consequences. Identify the Block G entry for this action.
|
|
6. |
The _________ will accept or reject the residual risk as calculated on the risk-management work sheet.
|
|
7. |
The _________ identifies environmental deficiencies and takes action to correct deficiencies that are outlined on the risk-management work sheet?
|
|
|