| Instructions |
The following items will test your understanding of the material covered in this lesson. There is only one correct answer for each item. When you have completed the exercise, check your answers with the answer key that follows. If you answer any item incorrectly, review that part of the lesson which contains the portion involved. |
|
| 1. |
What laying procedure is used to minimize the risks to the Flipper operator?
|
|
| 2. |
How many M75 AT mines does a disrupt Flipper minefield require?
|
|
| 3. |
When emplacing a turn effect Volcano minefield, how many minutes must the vehicle operator wait before starting the second strip?
|
|
| 4. |
Volcano minefield marking must include the safety zone, which is __ meters from the start and end points and __ meters to the left or right of the centerline.
|
|
| 5. |
The MOPMS RCU can recycle the 4-hour SD time of the mines __ times, for a total duration of approximately __ hours.
|
|
| 6. |
The safety zone is __ meters to the front and sides of the MOPMS container and __ meters behind the container.
|
|
|
