APPENDIX A
TRAIN-THE-TRAINER TASKS FOR THE
DGT AND DFTT
|
TASK |
CONDITIONS |
STANDARD |
Prepare the DGT for Operation |
Given a DGT and a 110-volt AC power supply. |
Assemble the DGT. |
Program the DGT for Operation |
Given a DGT, the correct program disks, and a 110-volt AC power supply. |
Program the DGT for the correct firing table. |
Operate the DGT |
Given a DGT, the correct program disks, and a 110-volt AC power supply. |
Operate the DGT using the correct firing table. |
Evaluate Gunner Performance |
Given a DGT, the correct program disks, and a 110-volt AC power supply. |
Operate the DGT using the correct firing table. Provide the gunner with an after-action review of his tracking and score. |
Conduct Shutdown Procedures for DGT |
Given a DGT, the correct program disks, and a 110-volt AC power supply. |
Shut down the DGT. |
Maintain the DGT |
Given a DGT, a 110-volt AC power supply, and the proper cleaning materials. |
Perform maintenance on the DGT. |
Prepare the DFTT for Operation |
Given a DFTT and either a 24-volt DC or a 120- or 240-volt AC power supply. |
Assemble the DFTT. |
Operate the DFTT |
Given a DFTT and either a 24-volt DC or a 120- or 240-volt AC power supply. |
Operate the DFTT using the correct firing table. |
Evaluate Gunner Performance |
Given a DFTT and either a 24-volt DC or a 120- or 240-volt AC power supply. |
Operate the DFTT using the correct firing table. Provide gunner with an after-action review of his tracking and score. |
Conduct Shutdown Procedures for DFTT |
Given a DFTT and either a 24-volt DC or a 120- or 240-volt AC power supply. |
Shut down the DFTT. |
Maintain the DFTT |
Given a DFTT and either a 24-volt DC or a 120- or 240-volt AC power supply. |
Perform maintenance on the DFTT. |
Table A-1. Train-the-trainer tasks for the DGT and the DFTT.
|
NEWSLETTER
|
| Join the GlobalSecurity.org mailing list |
|
|
|
