UNITED24 - Make a charitable donation in support of Ukraine!

Military

Pratt & Whitney and Rolls-Royce F135 STOVL Team Completes Propulsion System Test

EAST HARTFORD, Conn., June 12, 2007 – Pratt & Whitney and Rolls-Royce completed the first propulsion system qualification test for the short-takeoff/vertical-landing (STOVL) F135 engine. This is the first time the full-scale STOVL F135 engine airflow was tested with the F-35 LiftFan hardware in place. Pratt & Whitney is a United Technologies Corp. (NYSE:UTX) company.

“The success of this initial test confirms that Pratt & Whitney’s F135 STOVL engine will meet or exceed the thrust requirements for the F-35 program,” said Bill Gostic, vice president, Pratt & Whitney F135 program. “This is a significant step toward first flight of the F-35 STOVL aircraft, which is currently scheduled for May 2008.”

The engine test was completed in partnership with Lockheed Martin and Rolls-Royce at Pratt & Whitney’s facility in West Palm Beach, Fla. The test included extensive thrust analyses of the F135 propulsion system with an F-35 LiftFan inlet and door installed in front of the engine. The Rolls-Royce LiftFan® is the component that allows the F-35 STOVL aircraft to achieve vertical lift.

Pratt & Whitney is the lead propulsion system supplier for the F-35 program and to date, the F135 engine has logged more than 7,700 system design and development ground test hours and continues to power the F-35 Lightning II flight test program. The F135 engine is an evolution of the F119 engine for the F-22 Raptor; together the F135 and F119 will have logged more than 600,000 hours before the F-35’s introduction into operational service in 2012. Rated at more than 40,000 pounds of thrust, the F135 is the most powerful fighter engine ever built.

Rolls-Royce, a world-leading provider of power systems and services for use on land, at sea and in the air, operates in four global markets – civil aerospace, defense aerospace, marine and energy.

Pratt & Whitney is a world leader in the design, manufacture and service of aircraft engines, space propulsion systems and industrial gas turbines. United Technologies, based in Hartford, Conn., is a diversified company providing high-technology products and services to the global aerospace and building industries.

Pratt & Whitney Contacts:
Stephanie Duvall
Pratt & Whitney Military Engines
860.557.1382
stephanie.duvall@pw.utc.com

Jennifer Whitlow
Pratt & Whitney
860.565.9600
jennifer.whitlow@pw.utc.com

Rolls-Royce Contact:
Maria Y. Weber
Director, Corporate Communications, Rolls-Royce
317.230.6662
maria.y.weber@rolls-royce.com




NEWSLETTER
Join the GlobalSecurity.org mailing list