ATK Successfully Conducts NASA Ares I-X Separation Test
Jan 30, 2009
Test Simulated the Separation Required to Release Main Parachutes
Additional Ares I-X Milestone Achieved by Readying Flight Booster for Shipment to KSC
MINNEAPOLIS, Jan. 30 /PRNewswire-FirstCall/ -- Alliant Techsystems successfully conducted a full-scale separation of NASA's Ares I-X Forward Skirt Extension at its Promontory facility today. The test is a milestone in preparation for this summer's flight test of Ares I-X.
The test simulated a separation event that will take place following the first stage flight of Ares I-X. The booster will be separated at the frustum - a cone-shaped piece that attaches the first stage to the larger diameter upper stage. Following separation, the booster will return to earth for recovery and reuse. At an altitude of about 15,000 feet the nose cone will be jettisoned, deploying the pilot parachute. The pilot chute will in turn deploy the drogue parachute, which will re-orient the booster to vertical and slow it to acceptable conditions for main parachute deployment. At about 4,000 feet, the separation at the base of the forward skirt extension occurs, pulling out the three main chutes packed within.
Test objectives included the demonstration that the linear shaped charge used to separate the forward skirt extension created a clean severance, and measurement of the shock created by that charge. The data will be used to analyze the system and prepare for the Ares I-X test, as well as in the development of Ares I.
The forward skirt extension is built to withstand the loads of the first stage, and support the weight of the upper stage. The component is built as one solid piece of aircraft-t grade aluminum forged into a 6 foot long by 12 foot diameter cylinder with a unique internal support structure that houses three newly-designed main parachutes. Its state-of-the-art design will withstand the force that will be imparted at main chute deployment.
"This was an important milestone for the program, as it validates key parameters to support the upcoming Ares I-X flight test," said Mike Kahn, ATK Space Systems executive vice president. "The program is one step closer to the flight test of Ares I-X and demonstrating many of the key attributes of this system."
Separately, the four solid rocket segments for Ares I-X will ship to Kennedy Space Center in March. Integration of the segments with the simulated fifth segment and upper stage will then begin in the Vehicle Assembly Building in preparation for the Ares I-X test flight. The segments and aft exit cone have been instrumented with more than 100 sensors. The motor has a distinctive "Z strip" paint job that enhances the ability of the test team to observe rolling motions during ascent and tumbling motions during separation and recovery. This will provide valuable flight data for NASA to verify models for the Ares I program.
"Shipment of the segments will put ATK and NASA on track to begin stacking the vehicle for its important test flight this summer," Kahn added.
ATK is a premier aerospace and defense company with more than 17,000 employees in 21 states and approximately $4.5 billion in revenue. News and information can be found on the Internet at www.atk.com.
Certain information discussed in this press release constitutes forward-looking statements as defined in the Private Securities Litigation Reform Act of 1995. Although ATK believes that the expectations reflected in such forward-looking statements are based on reasonable assumptions, it can give no assurance that its expectations will be achieved. Forward-looking information is subject to certain risks, trends and uncertainties that could cause actual results to differ materially from those projected. Among those factors are: assumptions related to the development of the Ares I program; changes in governmental spending, budgetary policies and product sourcing strategies; the company's competitive environment; the terms and timing of awards and contracts; and economic conditions. ATK undertakes no obligation to update any forward-looking statements. For further information on factors that could impact ATK, and statements contained herein, please refer to ATK's most recent Annual Report on Form 10-K and any subsequent quarterly reports on Form 10-Q and current reports on Form 8-K filed with the U.S. Securities and Exchange Commission.
Media Contact: Investor Contact: Trina Patterson Jeff Huebschen Phone: 801-699-0943 Phone: 952-351-2929 E-mail: email@example.com E-mail: firstname.lastname@example.org
|Join the GlobalSecurity.org mailing list|