FM C3, FM 10-450-4
MCRP 4-23, VOL II
NWP 3-04.12
AFJMAN 11-223, VOL II
COMDINST M13482.3A
Field Manual No. 10-450-4 |
Headquarters Department of the Army Washington, DC, 30-May-1998 Change 3, 3 September 2003 |
FM 10-450-4 |
Multiservice Helicopter Sling Load: Single-Point Rigging Procedures |
DISTRIBUTION RESTRICTION: Approved for public release; distribution is unlimited.
Preface
This manual is one of a series of manuals for aviation and ground personnel who perform helicopter sling load missions ashore or aboard ship. Other manuals in this series are FM 10-450-3/MCRP 4-23E, VOL I/NWP 3-04.11/AFJMAN 11-223, VOL I/COMDTINST M13482.2A and FM 55-450-5/FMFRP 5-31, VOL III/NWP 42-1,VOL III/AFR 50-16, VOL III/COMDTINST M13482.4.
These manuals are a coordinated effort of the US Army, US Marine Corps, US Navy, US Air Force, and US Coast Guard. All services participate in the sling load certification program begun by the Army in 1984. These manuals include standardized rigging procedures and other information from that program. Chapters 2 through 14 contain rigging procedures for single-point loads which have been certified for sling load. Chapters 15 through 24 contain rigging procedures which have not been certified but have demonstrated acceptable static lift and flight characteristics during a flight test.
Efforts were made to standardize ground crew and hookup procedures and terminology. Where service-unique requirements apply to an entire chapter or body of text, the service initials are at the beginning of the chapter or text. Otherwise the initials are at the end of the applicable sentence.
Rigging equipment and procedures described in this manual may not be authorized for all aircraft or services because of equipment or service restrictions.
Adobe Portable Document Format (PDF) Files



NEWSLETTER
|
Join the GlobalSecurity.org mailing list |
|
|